| PIN NO. | Symbol | Description |
| 1 | GND | Power ground |
| 2 | VCI | Supply voltage for analog |
| 3 | RESET | Reset pin |
| 4 | CS | Chip selection pin |
| SPI-SCL | Serial interface clock | |
| 6 | SDA | SPI interface input/output pin. |
| 7 | GND | Power ground |
| 8 | VSYNC | Vertical (Frame)synchronizing input signal for RGB interface operation. |
| 9 | HSYNC | Horizontal (Line)synchronizing input signal for RGB interface operation. |
| 10 | ENABLI | Data enable signal for RGB interface operation. |
| 11 | DOTCLK | Dot clock signal for RGB interface operation. |
| 12 | GND | Power ground |
| 13~32 | DB0~DB17 | Data bus |
| 33 | GND | Power ground |
| 34 | LEDA | Anode of LED backlight |
| 35 | LEDK1 | Cathode of LED backlight |
| 36 | LEDK2 | Cathode of LED backlight |
| 37 | LEDK3 | Cathode of LED backlight |
| 38 | LEDK4 | Cathode of LED backlight |
| 39 | LEDK5 | Cathode of LED backlight |
| 40 | LEDK6 | Cathode of LED backlight |
| Parameter | Symbol | Min | Max | Unit |
| Supply voltage for analog | VCI | -0.3 | 4.6 | V |
| Supply voltage for logic | VCI | -0.3 | 4.6 | V |
| Supply current (One LED) | ILED | 30 | mA | |
| Operating temperature | TOP | -20 | +70 | ℃ |
| Storage temperature | TST | -30 | +80 | ℃ |
| Item | Symbol | Min | Typ. | Max | Unit |
| Supply Voltage for Analog | VCI | 2.5 | 2.8 | 3.3 | V |
| Supply Voltage for Logic | VCI | 2.5 | 2.8 | 3.3 | V |
| Input Voltage | VIL | GND | — | 0.3VCI | V |
| VIH | 0.7VCI | — | VCI | ||
| Input leakage Current | ILKG | -1 | — | 1 | μA |
| Item | Symbol | Value | Unit | Remark | ||
| Min. | Typ. | Max. | ||||
| Voltage for LED Backlight | VF | 2.8 | 3.2 | 3.4 | V | IL=120mA |
| Current for LED Backlight | IL | — | 120 | — | mA | — |
| Power Consumption | P | — | 0.384 | — | W | — |
| LED Life Time | — | 30,000 | 50,000 | — | Hr | Note |
Note: Brightness to be decreased to 50% of the initial value at ambient temperature TA=25℃.
