You are here: Home >> Product >> TFT LCD Display >> Standard TFT Display
Product
5 inch LCD Display
  • 5 inch LCD Display
  • 5 inch LCD Display
  • 5 inch LCD Display
  • 5 inch LCD Display

5 inch LCD Display


Part NO: MX-A50HR40-TNS07
► Size: 5.0"
► Resolution: 800*480 Pixels
► Display Mode: TN
► Brightness: 500 Nits
► Interface: RGB 40 PIN
► Touch Screen: Without (Optional)
    MX-A50HR40-TNS07 is a TN type 5-inch LCD display. It features a display area of 800x480 pixels, capable of showing up to 16.7 million colors. In terms of mechanical details, the active area measures 108.00(W) x 64.80(H) mm, with an outline size of 120.70(W) x 75.90(H) x 3.05(T) mm. This 5 inch TFT LCD display is a normally black, transmissive LCM product. It offers a display brightness of 500 cd/m² and a transmissive contrast ratio of 800:1. The viewing angle is 70/50/70/70 (Typ.) (CR≥10) (U/D/L/R), with the best view direction at 6 o‘clock. The 5 inch LCD display screen supports an RGB interface and has an operating temperature range of -20 to +70 ℃, with a storage temperature range of -30 to +80 ℃.

    Product Structure


    LCD PIN Function (RGB 40 PIN)

    Pin

    Symbol

    Description

    1

    LED_K

    Backlight LED Ground

    2

    LED_A

    Backlight LED Power

    3

    GND

    GND

    4

    VDD

    Power supply

    5~12

    R0-R7

    Red data bus

    13~20

    G0-G7

    Green data bus

    21~28

    B0-B7

    Blue data bus

    29

    GND

    GND

    30

    PCLK

    Data clock

    31

    DISP

    Stand by mode select pin

    32

    HSYNC

    Line SYNC signal

    33

    VSYNC

    Frame SYNC signal

    34

    DE

    Data Enable Input

    35

    NC

    NC

    36

    GND

    GND

    37

    X1

    Touch Panel Control Pin

    38

    Y1

    Touch Panel Control Pin

    39

    X2

    Touch Panel Control Pin

    40

    Y2

    Touch Panel Control Pin


    Electrical Absolute Maximum Ratings (Vss=0V ,Ta=25℃)

    Item

    Symbol

    Min.

    Max.

    Unit

    Note

    Power Supply Voltage

    VDD

    -0.3

    3.6

    V

    12

    Input Voltage

    VIn

    -0.3

    VDD+0.5

    V

    Current of LED

    ILED

    0

    20

    mA

    Notes:
    1. If the module is above these absolute maximum ratings. It may become permanently damaged.
    Using the module within the following electrical characteristic conditions are also exceeded, the
    module will malfunction and cause poor reliability.
    2. VDD>VSS must be maintained.
    3. Please be sure users are grounded when handing LCD Module.
     
    Environmental Absolute Maximum Ratings

    Item

    Storage

    Operating

    Note

    MIN.

    MAX.

    MIN.

    MAX.

    Ambient Temperature

    -30℃

    80℃

    -20℃

    70℃

    1,2

    Humidity

    -

    -

    -

    -

    3

    Notes:
    1. The response time will become lower when operated at low temperature.
    2. Background color changes slightly depending on ambient temperature.
    The phenomenon is reversible.
    3. Ta<=40: 85%RH MAX.
    Ta>=40: Absolute humidity must be lower than the humidity of 85%RH at 40.
     
    Electrical characteristics(Vss=0V ,Ta=25℃)

    Parameter

    Symbol

    Condition

    Min.

    Typ.

    Max.

    Unit

    Note

    Power supply

    VDD

    Ta=25℃

    2.8

    3.3

    3.6

    V

    -

    Input

    ‘H’

    VIH

    VDD=3.3V

    0.7VDD

    -

    VDD

    V

    -

    voltage

    ‘L’

    VIL

    VDD=3.3V

    0

    -

    0.3VDD

    V

    -

    Current

    Consumption

    ICC1

    Normal

    mode

    -

    -

    -

    mA

    2

    ICC2

    Sleep

    mode

    -

    0.03

    0.09

    mA

    2

    Note:
    1: When an optimum contrast is obtained in transmissive mode.
    2: Tested in 11 chessboard pattern.
     
    LED backlight specification(VSS=0V ,Ta=25℃)

    Item

    Symbol

    Condition

    Min.

    Typ.

    Max.

    Unit

    Note

    Supply voltage

    -

    -

    16.8

    18.6

    20.4

    V

    1

    Supply current

    If

    -

    -

    40

    -

    mA

    2

    LED Life Time

    -

    -

    30,000

    50,000

    -

    Hr

    Note:
    1: VLED=VLED(+)-VLED(-).
    2: The current of LED is 20mA.
    A LED drive in constant current mode is recommended.

Related products

MAXEN Electronics

+86-(0769) 8777 0259

+86-139 2346 1826

melody.xia@maxen-lcddisplay.com

Fl.9,No.1 Building,Changchun Ind.Zone,No.37 Zhentian West Rd.,Fenggang Town,Dongguan City,G.D Pro. 523702
Product
TFT LCD Display
Touch Screen
Optical Bonding
Company
About Us
Contact Us
News
Videos
More Links
Maxen on Globalsources
Maxen on Alibaba
©2023 Maxen Electronics Limited All Rights Reserved