MX-116FE30BFM-N05-FL3A is an 11.6 inch LCD Touch Display that employs OCR bonding for a robust unified structure. The 11.6 inch LCD screen features a resolution of 1920x1080 pixels, utilizes IPS full-view angle technology, connects via an EDP interface, and boasts a remarkable brightness of 600 nits. Equipped with a capacitive touchscreen using G+G structure and COB type connection, it supports control cards from both ILITEK and EETI, with compatibility for both IIC and USB interfaces. These specifications make the 11.6 inch LCD touchscreen suitable for various applications requiring high resolution, wide viewing angles, and touchscreen functionality. Additionally, its flexible interface and control card support enhance convenience for system integration.
Product Structure
LCD PIN Function (30 PIN eDP)
| PIN NO. | Symbol | Description Remark |
| 1 | CABC-EN | CABC-EN |
| 2 | GND | Power Ground |
| 3 | LANE1-N | eDP RX channel 1 negative |
| 4 | LANE1-P | eDP RX channel 1 positive |
| 5 | GND | Power Ground |
| 6 | LANE0-N | eDP RX channel 0 negative |
| 7 | LANE0-P | eDP RX channel 0 positive |
| 8 | GND | Power Ground |
| 9 | AUX-CH-P | eDP AUX CH positive |
| 10 | AUX-CH-N | eDP AUX CH negative |
| 11 | GND | Power Ground |
| 12~13 | LCD-VCC | 3.3V |
| 14 | LCD-TEST | Panel self test enable |
| 15~16 | GND | Power Ground |
| 17 | HPD | Hot plug detect output |
| 18~21 | BL-GND | Power Ground |
| 22 | BL-ENABLE | BL-ENABLE |
| 23 | BL-PWM | Reset low active |
| 24 | MSCL | FOR DEBUG |
| 25 | MSDA | FOR DEBUG |
| 26~29 | BL-POWER | BL-POWER |
| 30 | NC | NC |
ABSOLUTE MAXIMUM RATINGS
| Parameter | Min. | Typ. | Max. | Unit | ||
| LCD Power Supply Voltage | VDD | -0.3 | 3.3 | 3.6 | V | |
| Operating Temperature | Top | -20 | - | 70 | ℃ | |
| Storage Temperature | Tst | -30 | - | 80 | ℃ | |
| Power supply voltage for LED Driver | VLED | 5 | 12 | 21 | V | |
| Maximum LED Current Setting | ICH_Max | 6 | - | 25 | mA | |
| Minimum LED Current Setting | ICH_Min | 0.1 | - | - | mA | |
| Output Voltage | VLED | - | - | 37 | V | |
| EN Control Level | Backlight on | - | 1.2 | - | 5 | V |
| Backlight off | - | 0 | - | 0.6 | V | |
| PWM Control Level | PWM High Level | - | 1.2 | - | 5 | V |
| PWM Low Level | - | 0 | - | 0.6 | V | |
| PWM Control Frequency | FPWM | 200 | - | 20,000 | Hz | |
| Duty Ratio | - | 1 | - | 100 | % | |
ELECTRICAL SPECIFICATIONS
| Parameter | Symbol | Values | Unit | Notes | ||
| Min | Typ | Max | ||||
| Power Supply Input Voltage | VDD | 3 | 3.3 | 3.6 | V | - |
| Power Supply Current | IDD | - | - | - | mA | |
| Positive-going Input ThresholdVoltage | VIT+ | - | - | 100 | mV | Vcom=4.6V typ. |
| Negative-going Input Threshold Voltage | VIT- | -100 | - | - | mV | |
| Differential input common mode voltage | Vcom | - | 4.6 | - | V | VIH=100mV, VIL=-100mV |
LED Light Bar characteristics
| Parameter | Symbol | Value | Unit | ||
| Min. | Typ. | Max. | |||
| Light Bar Input Voltage | VLED | 28 | 30 | 33 | V |
| Light Bar Input Cuncnt | ILED | - | 240 | - | mA |
| Luminance of White | Y | - | 600 | - | cd/m2 |
| LED Life Time | LBL | 30000 | - | - | Hrs |
