|
Pin No. |
Symbol |
Function |
|
1 |
RXO0- |
Negative Transmission data of Pixel 0 (ODD) |
|
2 |
RXO0+ |
Positive Transmission data of Pixel 0 (ODD) |
|
3 |
RXO1- |
Negative Transmission data of Pixel 1 (ODD) |
|
4 |
RXO1+ |
Positive Transmission data of Pixel 1 (ODD) |
|
5 |
RXO2- |
Negative Transmission data of Pixel 2 (ODD) |
|
6 |
RXO2+ |
Positive Transmission data of Pixel 2 (ODD) |
|
7 |
GND |
Power Ground |
|
8 |
RXOC- |
Negative Transmission Clock (ODD) |
|
9 |
RXOC+ |
Positive Transmission Clock (ODD) |
|
10 |
RXO3- |
Negative Transmission data of Pixel 3 (ODD) |
|
11 |
RXO3+ |
Positive Transmission data of Pixel 3 (ODD) |
|
12 |
RXE0- |
Negative Transmission data of Pixel 0 (EVEN) |
|
13 |
RXE0+ |
Positive Transmission data of Pixel 0 (EVEN) |
|
14 |
GND |
Power Ground |
|
15 |
RXE1- |
Negative Transmission data of Pixel 1 (EVEN) |
|
16 |
RXE1+ |
Positive Transmission data of Pixel 1 (EVEN) |
|
17 |
GND |
Power Ground |
|
18 |
RXE2- |
Negative Transmission data of Pixel 2 (EVEN) |
|
19 |
RXE2+ |
Positive Transmission data of Pixel 2 (EVEN) |
|
20 |
RXEC- |
Negative Transmission Clock (EVEN) |
|
21 |
RXEC+ |
Positive Transmission Clock (EVEN) |
|
22 |
RXE3- |
Negative Transmission data of Pixel 3 (EVEN) |
|
23 |
RXE3+ |
Positive Transmission data of Pixel 3 (EVEN) |
|
24 |
GND |
Power Ground |
|
25 |
NC |
Not connection, this pin should be open |
|
26 |
NC |
|
|
27 |
NC |
Not connection |
|
28 |
VDD |
Power Supply: +5V |
|
29 |
VDD |
|
|
30 |
VDD |
| Parameter | Symbol | Min. | Max. | Unit | Remarks |
| Power Supply Voltage |
VDD |
-0.3 | 5.5 | V | Ta=25℃ |
| Logic Supply Voltage |
VIN |
VSS-0.3 |
VDD+0.3 |
V | |
| Operating Temperature |
TOP |
-20 | +85 | ℃ | — |
| Storage Temperature |
TST |
-30 | +85 | ℃ | — |
| Liquid crystal clear point |
TLC |
104.9 | ℃ | Typ. | |
| Parameter | Min. | Typ. | Max. | Unit | Remarks | |
| Power Supply Voltage |
VDD |
4.5 | 5.0 | 5.5 | V | Notel |
| Power Supply Current |
IDD |
— | 700 | 1200 | mA | |
| In-Rush Current |
IRUSH |
— | — | 3 | A | Note 2 |
| Permissible Input Ripple Voltage |
VRF |
— | — | 300 | mV | VDD=5.0V |
| High Level Differential Input Threshold Voltage |
VIH |
— | — | +100 | mV | — |
| Low Level Differential Input Threshold Voltage |
VIL |
-100 | — | — | mV | |
| Differential Input Voltage |
|VID| |
200 | — | 600 | mV | — |
| Differential Input Common Mode Voltage |
Vcm |
1.0 | 1.2 | 1.5 | V | VIH=100mV, VIL=-100mV |
| LED Voltage |
VL |
— | 6 | — | V | — |
| LED Channel Voltage |
VL |
— | 54 | — | V | Duty 100% |
| LED Channel Current |
IL |
— | 350 | — | mA | Duty 100%, Each channel |
| LED Life Time | — | 30000 | — | — | Hrs | IL=90mA, Note 4 |
| Power Consumption |
Ptotal |
— | 38.5 | — | W | — |
Notes:
1. The supply voltage is measured and specified at the interface connector of LCM. The current draw and power consumption specified is for VDD=5.0V, Frame rate=60Hz.
2. Duration of rush current is about 2 ms and rising time of VDD is 520μs±20%
3. Calculated value for reference(VL×IL)×4(channel)excluding driver loss. (LED Light bar: 17S4P)
4. The lifetime is determined as the time at which luminance of LED become 50% of the initial brightness or not normal lighting at IPIN=90mA on condition of continuous operating at 25±2℃.
