| Pin No. | Symbol | Description |
| 1 | LED A | LED ANODE |
| 2~3 | LED K | LED CATHODE |
| 4 | GND | Ground |
| 5 | VCI | Power supply |
| 6 | RESET | Reset Signal ,Active Low |
| 7~8 | NC | NC |
| 9 | SDA | SPI Data signal |
| 10 | SCK | SPI Clock signal |
| 11 | CS | SPI Chip select signal |
| 12 | PCLK | RGB dot clock signal |
| 13 | DE | RGB data enable signal |
| 14 | VSYNC | RGB frame synchronizing signal |
| 15 | HSYNC | RGB line synchronizing signal |
| 16~33 | DB0~DB17 | RGB data signal (DB0: BLUE LSB; DB5: BLUE MSB; DB6: GREEN LSB; DB11: GREEN MSB; DB12: RED LSB; DB17: RED MSB) |
| 34 | GND | Ground |
| 35 | TP_INT | Touch Interrupt |
| 36 | TP_SDA | Touch IIC Data signal |
| 37 | TP_SCL | Touch IIC Clock signal |
| 38 | TP_RESET | Touch Reset Signal |
| 39 | TP_VCI | Touch Power supply |
| 40 | GND | Ground |
| Item | Symbol | Value | Unit |
| Power supply voltage for logic | VDD | 0.3~4.8 | V |
| Input voltage | Vin | VDD+0.3 | V |
| Operating temperature | Topr | -20 to 70 | ℃ |
| Storage temperature | Tstg | -30 to 80 | ℃ |
| Item | Symbol | Min | Type | Max | Unit | Test condition |
| Operating voltage | VDD | 2.5 | 2.8 | 4.8 | V | — |
| Supply current | lDD | — | — | 5 | mA | VDD=2.8V,Ta=25℃ |
| Input voltage | VIH | 0.8VDD | — | VDD | V | — |
| VIL | 0 | — | 0.2VDD | V | ||
| Input leakage current | IL | -1.0 | — | 1.0 | μA | VIn=VDD or Vss |
Note: Voltage greater than above may damage the module.
All voltages are specified relative to VSS=0V.
| Item | Symbol | Min | Typ | Max | Unit |
| Forward Current | IF | — | 20 | — | mA |
| Forward Voltage | VF | — | 19.2 | — | V |
| Connection mode | P | — | 6S1P | — | — |
| LED number | / | — | 6 | — | pcs |
