New compact IPS TFT LCD with 240x282 resolution, SPI interface and 550 nits brightness for smart remote controls and space-limited embedded devices.
MAXEN introduces MX-195M003A-ZT, a new 1.95 inch small TFT display developed for compact electronic products where installation space, display clarity and simple interface integration are important.
Featuring 240×282 resolution, IPS technology and 550 nits minimum brightness, this small TFT LCD combines a compact 34.3 × 42.02 mm module size with an SPI interface and GC9307N driver IC. The display is particularly suitable for smart remote controls, handheld electronics, portable instruments and other embedded devices requiring a compact graphical user interface.
| Model NO. | MX-195M003A-ZT |
|---|---|
| Display Mode | Normally Black / Transmissive |
| Outline Dimension | 34.30 × 42.02 mm |
| Active Area | 32.20 × 37.83 mm |
| Module Thickness | 1.60 ± 0.1 mm |
| Operating Temperature | -20°C to +70°C |
| Storage Temperature | -30°C to +80°C |
As electronic devices become smaller, display integration needs to consider more than screen size alone. PCB space, enclosure depth, interface routing and information readability all influence the final product design.
MX-195M003A-ZT provides a 32.2*37.83 mm active area within a compact 1.95 inch form factor, while module thickness is approximately 1.60 mm.
This compact structure allows the small LCD display to fit into handheld and embedded equipment where available installation space is limited.
The 240×282 resolution provides sufficient detail for displaying common user-interface elements such as:
This small TFT LCD display uses IPS technology with normally black and transmissive display characteristics.
IPS technology helps maintain consistent image and color presentation when users view the display from different directions, which is useful for handheld controllers and portable equipment that may not always be viewed directly from the front.
Standard brightness reaches 550 nits minimum, providing clear visual performance for many indoor and portable-device environments.
For applications with different ambient lighting or power-consumption requirements, customized backlight and brightness options can also be evaluated.
MX-195M003A-ZT adopts an SPI interface together with the GC9307N driver IC.
SPI requires relatively few signal lines, helping simplify communication between the TFT LCD and host MCU in compact electronic designs.
The GC9307N functions as the display driver, receiving image data and control commands from the host controller and managing the signals required to drive the TFT LCD panel.
For compact embedded products where PCB space and connector routing are important, this combination provides a practical display integration solution.
Smart remote controls increasingly use color TFT displays instead of basic segmented screens.
A compact color display allows more information to be presented within the same user interface, including operating modes, device status, temperature, adjustment levels, battery information and graphical menus.
The 1.95 inch small TFT display is particularly suitable for remote-control products because its compact dimensions help maintain a comfortable handheld form factor while still providing enough display area for a clear graphical interface.
Typical applications can include:
Display operating modes, adjustment values, battery status and graphical control information.
Provide parameter information, equipment status and simple control interfaces in compact medical equipment.
Display measurement values, system status and menu information in handheld instruments.
Support graphical interfaces for lighting, environmental control, appliances and other connected devices.
Provide status monitoring and basic menu navigation where a compact color display is required.
Different embedded products may require different electrical and mechanical configurations.
Based on project requirements, MAXEN can evaluate customization involving:
These customization options help adapt the display to the customer's mainboard, enclosure and final product structure instead of requiring the equipment design to follow a fixed standard LCD configuration.
For products requiring direct user interaction, matching capacitive touch screen can also be evaluated.
Touch structure, cover glass, interface, bonding method and overall mechanical design can be developed according to the final application requirements.
This enables the 1.95 inch TFT LCD to serve not only as an information display, but also as part of a compact interactive control interface.
In addition to this new 1.95 inch model, MAXEN also provides other compact TFT LCD sizes for embedded and handheld applications.
Other sizes, resolutions, brightness levels and interface configurations are also available. Contact MAXEN for recommendations based on your installation space and project requirements.
MX-195M003A-ZT combines 240x282 resolution, IPS technology, SPI interface and 550 nits brightness in a compact display solution for smart remote controls and space-limited embedded devices.
Need different brightness, interface, FPC or touch integration? MAXEN can evaluate customization based on your project requirements.
+86-13923461826
