12.1 inch 800x600 Industrial LCD Panel-MAXEN - TFT LCD Display Manufacturer, LCD Panel Factory, Touch Screen Supplier

< >

12.1 inch 800x600 Industrial LCD Panel

Part NO: MX-121SN-01-V403
► Size: 12.1"
► Resolution: 800*600 Pixels
► Display Mode: TN
► Brightness: 1200 Nits
► Interface: LVDS 20 PIN
► Touch Screen: Without (Optional)

Make an inquiry

Datasheet Download

Description

MX-121SN-01-V403 is a meticulously designed 12.1 inch industrial LCD panel supporting an SVGA resolution of 800x600 pixels. This 12.1 inch TFT LCD Module incorporates a TFT LCD display, a driver, a power supply circuit, and a durable LED backlight system. With a broad operational temperature range of -30 to 85℃, an impressive brightness of 1200 nits, and a long-life LED backlight, the 12.1 inch LCD module is an optimal choice for industrial applications demanding reliability and longevity. The 12.1 inch LCD module is RoHS compliant, reflecting its environmental sustainability commitment.

Product Structure

Drawing of 12.1 inch 800x600 Industrial LCD Panel

12.1 inch 800x600 Industrial LCD Panel(2)

TFT-LCD Interface Signal Description (LVDS 20 PIN)

Pin No.	Symbol	Description	Remark
1	VDD	Power Supply, 3.3V (typical)	-
2	VDD	Power Supply, 3.3V (typical)	-
3	GND	Ground	-
4	SEL68	6/ 8bits LVDS data input selection [H: 8bits L/NC: 6bit]	Note1.2
5	RIN0-	LVDS receiver signal channel 0	Note1
6	RIN0+	LVDS Differential Data Input (R0,R1,R2,R3,R4,R5,G0)	Note1
7	GND	Ground	-
8	RIN1-	LVDS receiver signal channel 1	Note1
9	RIN1+	LVDS Differential Data Input (G1,G2,G3,G4,G5,B0,B1)	Note1
10	GND	Ground	-
11	RIN2-	LVDS receiver signal channel 2	Note1
12	RIN2+	LVDS Differential Data Input (B2,B3,B4,B5,HS,VS,DE)	Note1
13	GND	Ground	-
14	CLKIN-	LVDS receiver signal clock	Note1
15	CLKIN+	LVDS receiver signal clock	Note1
16	GND	Ground	-
17	RIN3-	LVDS receiver signal channel 3	-
18	RIN3+	LVDS Differential Data Input (R6,R7,G6,G7,B6,B7,RSV) pin17=VDD & pin18=GND for 6bit LVDS Input	Note1
19	REVERSE	Reverse Scan Function [H:Enable; L/NC:Disable]	Note1.2.3
20	NC/GND	Reserved for AUO internal test. Please treat it as NC.	Note2

Note 1: Input Signals shall be in low status when VDD is off.

Note 2: High stands for “3.3V”, Low stands for “0V”, NC stands for “No Connection”.

Note 3: There is a pull-low resistor 10Kohm on PCB, so please input "3.3V" directly for H status and "0V" directly for L status.

Absolute Ratings of TFT LCD Module

Item	Symbol	Min.	Max.	Unit
Logic/LCD Drive Voltage	VDD	-0.3	3.8	[Volt]
Control Signals	SEL68, REVERSE	-0.3	VDD	[Volt]
LVDS Signals	CLKIN-/+, RIN0~3-/+	-0.3	VDD	[Volt]
LED Input Voltage	VCC	-0.3	13	[Volt]
LED Control Signals	EN, PWM	-0.3	6	[Volt]

Absolute Ratings of Environment

Item	Symbol	Min	Max	Unit
Operating Temperature	TOP	-30	85	[℃]
Operation Humidity	HOP	5	95	[%RH]
Storage Temperature	TST	-30	85	[℃]
Storage Humidity	HST	5	95	[%RH]

Note: Maximum Wet-Bulb should be 39℃ and no condensation.

LCD Electrical Specification

Symbol	Parameter		Min.	Typ.	Max.	Units	Remark
VDD	Logic/LCD Input Voltage		3	3.3	3.6	[Volt]	-
IVDD	LCD Input Current		-	0.2	0.24	[A]	VDD=3.3V at 60 HZ, all Black Pattern
PVDD	LCD Power consumption		-	0.66	0.79	[Watt]	VDD=3.3V at 60 HZ, all Black Pattern
Irush LCD	LCD Inrush Current		-	-	1.5	[A]	VDD=3.3V at 60 HZ, all Black Pattern Note 1 VDD rising time≧470us
VDD_rp	Allowable Logic/LCD Drive Ripple Voltage		-	-	100	[mV] p-p	VDD=3.3V at 60 HZ, all Black Pattern
VIH	Control Signals Voltage	High Level	0.7*VDD	-	VDD	[Volt]	SEL68 and REVERSE
VIL	Control Signals Voltage	Low Level	0	-	0.3*VDD	[Volt]	SEL68 and REVERSE

Backlight Unit

Following characteristics are measured under stable condition at 25℃. (Room Temperature)

Symbol	Parameter		Min.	Typ.	Max.	Unit	Remark
VCC	Input Voltage		10.8	12	12.6	[Volt]	-
I_VCC	Input Current		-	0.33	0.4	[A]	VCC=12V & 100% PWM Duty
P_VCC	Power Consumption		-	3.96	4.8	[Watt]	VCC=12V & 100% PWM Duty
V_EN	EN Control Level	BL On	3	-	5.5	[Volt]	-
V_EN	EN Control Level	BL Off	0	-	0.5	[Volt]	-
F_PWM	Dimming Frequency		200	-	20K	[Hz]	-
D_PWM	Dimming Duty Cycle		5	-	100	%	-
V_PWM	Dimming Control Level	High Level	3	-	5.5	[Volt]	-
V_PWM	Dimming Control Level	Low Level	0	-	0.5	[Volt]	-
I_F	LED Forward Current		-	45		[mA]	Ta=25℃
V_F	LED Forward Voltage		-	3.2	3.6	[Volt]	I_F=45mA,Ta=25℃
P_LED	LED Power Consumption		-	3.02	3.4	[Watt]	-
-	LED life time		50,000	-	-	Hrs	I_F=45mA,Ta=25℃