10.36 inch Bar Type LCD Display-MAXEN - TFT LCD Display Manufacturer, LCD Panel Factory, Touch Screen Supplier

< >

10.36 inch Bar Type LCD Display

Part NO: MX-1036FM34-IL01
► Size: 10.36"
► Resolution: 720*1600 Pixels
► Display Mode: IPS
► Brightness: 700 Nits
► Interface: MIPI 34 PIN
► Touch Screen: Without (Optional)

Make an inquiry

Datasheet Download

Description

MX-1036FM34-IL01 is a 10.36 inch Bar Type LCD Display, standing out with its IPS technology. This innovative technology delivers a broader viewing angle of 80/80/80/80, along with a robust contrast ratio of 800:1 and a high brightness level of 700 nits. The LCD Display is integrated with the HX8252A driver IC, supporting a 4-Lane MIPI DSI (Display Serial Interface) — a sought-after feature due to its high-speed data and clock transmission capabilities. This 10.36 inch Bar Type LCD Display exhibits resilient performance across a wide range of operating temperatures, from -20℃ to +70℃, and can be safely stored between -30℃ and +80℃.

Product Structure

Drawing of 10.36 inch Bar Type LCD Display

LCD PIN Function

PIN No.	SYMBOL	Function
1-4	GND	Ground
5	AVDD	Power supply for Charge pump circuit. (5.5V)
6	AVEE	Power supply for Charge pump circuit. (-5.5V)
7	IOVCC	Power supply (1.8V-3.3V)
8	GND	Ground
9	D0N	DSI Data differential signal input pins. (Data lane 1)
10	D0P	DSI Data differential signal input pins. (Data lane 1)
11	GND	Ground
12	D1N	DSI Data differential signal input pins. (Data lane 2)
13	D1P	DSI Data differential signal input pins. (Data lane 2)
14	GND	Ground
15	CLKN	DSI CLOCK differential signal input pins
16	CLKP	DSI CLOCK differential signal input pins
17	GND	Ground
18	D2N	DSI Data differential signal input pins. (Data lane 3)
19	D2P	DSI Data differential signal input pins. (Data lane 3)
20	GND	Ground
21	D3N	DSI Data differential signal input pins. (Data lane 4)
22	D3P	DSI Data differential signal input pins. (Data lane 4)
23	GND	Ground
24	RESET	Reset Signal pin (“Low” is enable)
25-26	GND	Ground
27	PWM	LCD backlight control PWM output pin. Leave the pin open when not in use.
28-29	GND	Ground
30-31	LEDK	Backlight LED Cathode
32-33	LEDA	Backlight LED Anode
34	GND	Ground

Absolute Maximum Ratings

Item	Symbol	Rating			Unit
Item	Symbol	MIN.	TYP.	MAX.	Unit
Supply Voltage range	VDD	-0.3	-	VDD+0.3	V
Power supply for gate drive	VGH	-	18.0	-	V
Power supply for gate drive	VGL	-	-10.0	-	V
TFT Common Voltage	VcomH	-	0.7	-	V
TFT Common Voltage	VcomL	-	0.4	-	V
Operating Temperature range	T_OP	-20	-	70	℃
Storage Temperature range	T_ST	-30	-	80	℃

Electrical Characteristics

Item	Symbol	Min.	Type.	Max.	Unit
Logic Supply Voltage	IOVCC	1.7	1.8	3.6	V

Backlight Characteristics

White LED x24n Parallel/Series (Ta = 25°C)

Item	Symbol	Condition	Min.	Typ.	Max.	Unit
Forward Voltage	VF	IF=180mA	22.4	-	26.4	V
Uniformity	△Bp	-	80	-	-	%
Luminance for LCD	Lv	IF=180mA	650	700	720	cd/m²